Cobalt Blue G250CF Topper-

The fire pit below was a traditional lava rock fire pit

Now filled with lava rock (crushed 1/4" 3/8") over 3/8" 1/2" crushed. Remember the larger is under the smaller to keep the glass from falling through.

Above a flex line was installed to raise the ring to the surface. You don't want to leave the ring at the bottom unless you want an explosion or if you want to get rid of the significant other.

Below

Pour more crushed lava to make the desired shape of the fire pit and test burn for flame pattern.

Starfire base and a few other colors were added

Azurlite, Scarlet Topper, Red Topping, Ice, Copper Blue Topper, Copper Blue is a chameleon as when it gets hot it turns green and when it cools it turns back to blue!

Patterns, can you do better?

Pretty creative!

Great job and very creative.

The fireplace below has a Starfire base and several Toppers for color:

Pink, Cobalt Blue, Fuchsia, Hyacinth, Amethyst, Pale Cobalt Blue, Aquamarine, Lilac, Steel Blue and Purple.

Now we added a surround to finish it off. If you look on the lower right there is a remote control which is hidden by the surround.

The fire pit below has a Clear Base Glass with  Starfire Base Glass and 1/2" Starfire Base Glass, Yellow Amber Topper. Cobalt Blue Topper and Emerald Green Topper and a little bit of ICE ICE ICE Topper. The earth as the back yard and a lot of friends, wow!

The fireplace below is in San Diego, California and the colors used were:

Cobalt Blue Topper

Steel Blue Topper

Cranberry Pink Topping

Purple Topper

Lilac Topper

Deep Royal Topping

Clear Base Glass

Solex Base Glass and Solex Reflective Base Glass

Azurlite Base Glass and Azurlite Reflective Base Glass

Blue Green Base Glass and Blue Green Reflective Base Glass

and a little bit of Ice Ice Ice Topper on top

wow!

The end pictures show that the burner was too close the wall which was an easy fix by moving the burner forward.

This is where is went a little bit wrong, oops. We just had them move the burner forward and now its fine and the back wall was repainted.

The fireplace below is a direct vent self install by Norm. The colors used were: Starfire base, Cobalt Blue Topper, Pale Cobalt Blue Topper, Ice Ice Ice, Pale Gray Topper, Gray Topper and Copper Blue Topper.

We use a piece of stainless steel in the front to contain the glass to cover the burners and keep the glass level.

We will be posting different ideas on fire pit covers we can build or design for your fire pit.

This fire pit is in Pasadena California. The base is Ford Blue and V Blue Topped with both colors in Reflective. Then we Topped it with Cobalt Blue Topper, Copper Blue Topper and Lagoon Topper. Then we made a simple tie cover to keep the pit looking great all of the time when it is not in use.

The fireplace below has Evergreen and Reflective, Emerald Green Topper, Pink Rosa, Azurlite, Cobalt Blue Topper, Olive Green Topper, Green Diamonds and Blue Tubes Toppers. They had use their existing pan burner which was a double burner and worked out just fine.

The fireplace below has a Starfire base with Cobalt Blue Topper. Very nice room remodel!

The fireplace below belongs to Ross Barnett in Florida. This was a ventless propane installation. Ross built a front wave design and we built a special wedge pan with the controls underneath. This is a remote control ventless burner. Great job Ross! The glass that was uses was:

Black and Black Reflective

Gray and Gray Reflective

Aquamarine Topper

Copper Blue Topper

Light Blue Tubes

Cobalt Blue Topper

Pale Cobalt Blue Topper

and here are the before and after pictures.

Above is before the wave

and below is the wave before out ventless burner was installed.

What makes us different from anyone else is that we allow you to exercise your imagination. If you see it, dream it, draw it, imagine it we can build it for you. Ross saw what we did for other customers and he came up with this very cool design for us to build for his family room, thanks Ross!

The fireplace below a Starfire base with

Copper Blue Topper

Cobalt Blue Topper

Dark Red Orange Topper

Cherry Red Topper

Jade Green Topper

Lime Green Topper

Lime Green Topper

Black Topper

and Lilac Topper

What make us different from anyone else is what we offer you as a selection. We offer hundreds of colors, sizes, textures, variations, categories and more importantly we set the standard which everyone else can only try to imitate us. We welcome your comments and suggestions so please send us your comments.Imitation is the highest form of flattery, thank you.

 

 

The fire pit below has a Clear base glass,

Cobalt Blue Topper,

Copper Blue Topper and

Azurlite base glass for one very nice fire pit and back yard!

 

The fire pit below is in Newport Beach California at Newport Coast Development. We replaced a hot spark ignition which did not work, with our IPI (intermittent Pilot Ignition) electronic ignition system.  The fire pit was 18" deep and 48" across. This is what was installed:

1 IPI Electronic Ignition for Natural Gas connected to a 1" gas line

1300 lbs crushed lava

144 lbs Clear base glass for a 2" fill over the crushed lava

36" triple stainless steel burner ring

20 lbs Clear Topper

20 lbs Cobalt Blue Topper

20 lbs Copper Blue Topper

We will show your from beginning to end:

Looked pretty nasty  when we got there

We started to pour the crushed lava with our electronic ignition being raised to the surface by the lava rock

We built a double box to protect the equipment in the fire pit as well

The ring is now installed

The electronics  can be accessed if ever there was a failure of the equipment and you can access it from the surface. Before the equipment was 20 inches below the surface, not a very good idea!

Now we poured the 144 lbs of Clear base over the crushed lava

We only did the fire pit, not the view. That came with the home. But one very impressive view!

Then we spread the Clear Topper, Cobalt Blue Topper and Copper Blue Topper over the Clear base

As you have looked at all of our pictures we would like you to know we use Crystals as our Toppers and Toppings. We don't use "Recycled" glass, ever! We are actually the only company that produces Crystals for fireplace and fire pits.

We tried to get pictures of it burning, but the flames just didn't show. Look above and you can see a flicker in the daylight. Actually the flames were over 16" tall but you can't see this in daylight.The contractor will get a few night pictures when they and if they can. 

 

 

The fire table below is in Sackets Harbor New York with one very nice view. The colors that were used are:

Bronze base glass

Gold and

Cobalt Blue Topper

The burner below is one of our FPPK's (fire pit propane kit). With this FPPK we set it up for Black Magic! This was table tested for the pictures. Hopefully the customer will send us pictures after and during installation. We first sent these pictures for the customers approval. Here you go! The pan below belongs to Scott Spector and he finally installed the fire pit in his back yard, WOW, one really nice backyard!

This is one of our propane pan burner with slight modifications.

As you can see around the lower edges it was leaking and yes we did fix this. 

 

The fire pit below was built by Scott Spector in Florida. He started with an FPPK 30 which includes a 30" base plate and a double 24" stainless steel ring. Here we go from the beginning:

The propane line was run/ installed under the pavers.

The colors that were used are

1/2" Clear base,

Black Magic in the center,

Clear Diamonds,

Cobalt Blue Topper,

Clear Topper,

Cobalt Blue Light Topper

and our FPPK 30". That is our 30" propane burner. You can see the actual burner above burning before shipment and installation.

We don't have any pictures of the fire pit burning at Scott's but he did tel us that when he fired it up again he would try to send us a few pictures. Thanks Scott.

The fire pit below has V Blue, V Blue Reflective and topped with Cobalt blue Topper

                         

This next fireplace is a direct vent conversion and the glass that Charlene used was:

V Blue Reflective,

Black Reflective,

Gray Reflective,

Copper Blue Topper,

Blue Luster Diamonds,

Black Silicone Carbide under the Blues,

Cobalt Blue Diamonds,

Sky Blue Diamonds

and

Cobalt Blue Square Ice.

I think she wanted it to POP and it did!

              

The fireplace below has

a StarfireStarfire base with:

Orange R140 Topper,

Garnet Topper,

Ice Ice Ice,

Cobalt Blue,

Copper Blue and Steel Blue toppers.

The Orange R140 Topper is actually one of our chameleons, it turns to bright red when it gets hot and then changes back!

Our Copper Blue Topper is a chameleon as well. It turns to green and changes back to blue when cooled!

 

 

 

  Cobalt Blue G250CF
“CLICK HERE TO SEE THIS PRODUCT IN THE E STORE!”