1/4" Super Black.
ID code: 1/4" Super Black.
1/4" Super Black
The four pictures below are Black with Black Reflective on the surface
Black base with Red Topping
The fireplace below has Starfire and then Black was added after the fireplace surround was installed.
The fireplace below has Clear, Gold and Black. A little drywall and paint and here you have one cool fireplace!
The 2 pictures below have Bronze, Bronze Reflective, Black, Black Reflective and Pale Cobalt Blue Topper.
The fireplace below has Black and Black Reflective installed
The custom fireplace below has a star burner and a very nice star opening
From the start......
to the finish
Very modern. The fireplace above has Gray, Gray Reflective, Black, and Black Reflective
The pictures below are of a Starfire base with Black Reflective on top.
The indoor fire table below has:
Bronze, Black, Emerald Green, Reflective Green, Black Reflective and Gold
The fireplace below has Clear, Gray, Black Clear Pyrite and Topped with 1/2" Starfire.
The fireplace below has: Bronze and Reflective, Black and Reflective and Amber
The fireplace below has a base of Black and Black Reflective with Fire Stones on top.
The fireplace below has Black, Black Reflective and ICE on top
The fireplace below is a very unique fireplace in Huntington Beach. Black , Black Reflective, Red Topper and Red Topping.
Click on any of the pictures below to how this was actually made.
Click on any of the pictures above to how this was actually made.
The fireplace below has a Starfire base with Black, Azurlite, Azurlite Reflective and a lot of work. Very nice!
The pictures below are of the fire pit on the roof top of the Marriott in downtown San Diego in the Gas Lamp District on the 24th floor, very cool view if your ever there. The 2 half round 24" x 48" stainless steel rings were made custom for this fire pit. The glass that was used was a 50/50 mix of Starfire and Black. Very nice effect along with the view.
The half round burners below were installed at the Marriott "Gas Lamp" San Diego, California in a 72" Fire pit. We will post pictures of the finished project when we get the pictures sent to us. These were 24" x 48" stainless steel half round burners.
The fireplace below belongs to Ross Barnett in Florida. This was a ventless propane installation. Ross built a front wave design and we built a special wedge pan with the controls underneath. This is a remote control ventless burner. Great job Ross! The glass that was uses was:
Black and Black Reflective
Gray and Gray Reflective
Copper Blue Topper
Light Blue Tubes
Cobalt Blue Topper
Pale Cobalt Blue Topper
and here are the before and after pictures.
Above is before the wave
and below is the wave before out ventless burner was installed.
What makes us different from anyone else is that we allow you to exercise your imagination. If you see it, dream it, draw it, imagine it we can build it for you. Ross saw what we did for other customers and he came up with this very cool design for us to build for his family room, thanks Ross!
The fire table/ fire pit below is in Texas and was designed with our glass in mind to be installed and it has a Black base,
Black Luster Topper,
and Bronze Topper.
The fireplace below is a propane fireplace with a Black Base and Clear Diamonds on top. We built a pan to hold the glass with out the legs and covered/ protected the burner controls inside of the pan. The controls are on the right side and they are shielded and buried under the glass. The customer was going to finish the front of the steel pan after he installed it.
The fire pit below has a Black base with Black Reflective on top.Not too great of a fire pit picture but you get the idea. Even with Black as a base glass you will only see the color of glas s under the fire. The flames don't change color nor does the glass, but the glasss is what will reflect the light at night.
The fireplace below was assembled by Nadine in Dallas Texas (Elegant Reflections USA) Great job on the skull! The base glass is Starfire and Black base makes up the skull. She also used Clear Diamonds and Clear Crystals from our Toppers.
You can see the Diamonds and Crystals around the outer edge for accents.
Below is a collection we took pictures for our customer to decide on which base to use under the Amber Diamonds.
Amber Diamonds alone
Amber Diamonds on Black
Amber Diamonds on Starfire
Amber Diamonds on New Yellow
Amber Diamonds on Bronze
The same product can be displayed thousands of ways. What do you want to see? Our diamonds are made with a convex base so when you look at the Diamonds in the fire they seem to be melting on the inside, like looking into a spoon. We cause it to reflect backwards. Visit out "Diamonds Page" to see many more colors!